Hello, I have a Windows Server 2016 Essentials server that I have setup a scheduled backup on. I have it doing a full bare metal backup to an external hard drive. Windows shows the scheduled backup in the Windows Server Backup GUI and in the
Task Scheduler. I can run the backup manually, without any issues, but when the scheduled backup is set to run it doesn't. If I launch the Windows Server Backup GUI it will tell me that the backup is scheduled to run the next day. When I look at
the scheduled task I see that it is using the SYSTEM account and has a Last Run Result 0xC0000142. I have never had an issue with the Windows Backup program and this was a fresh install all I configured on server is to be a domain controller and ran all of
the Windows updates. I haven't messed with any setting or permissions as well. To me if feels like it's a permission problem but I don't understand why, when the backup is running with the SYSTEM account, just like all my other servers. I
have removed the backup schedule and re-added it but that didn't make a difference. I do see where a user was having a similar issue and was being told to add the SYSTEM account to the Administrators Group in Active Directory. I have never needed to do this
and would like to fix the issue and not add the SYSTEM account to this group.
↧
Windows Server 2016 Essentials Not Running Scheduled Backup
↧
Windows Server 2016 - Automatic Schedule - Invalid location
Hello Everyone,
So this is a weird problem. Using the windows feature backup utility. I am able to back up to a network shared folder only by selecting a manual backup option and it does not ask me for credentials. But if I select the Automatic Schedule backup it will ask
me for credentials and I use the backup operator credentials. It allows me to go to the final step and then it fails with an error "This is an invalid location." I'm like I just did a backup manually, why is it failing when I want to schedule automatic
backups.
Anyone have any ideas or suggestions on what could be causing this?
Later on today I will be scrutinizing logs to see if I can find any errors or warnings that may suggest the reason for the error. I have a couple of places that I will be checking.
Thanks,
PB
↧
↧
Snapshot vs System State Backup
Hello,
This is for a Windows Server 2016.
So yesterday my boss asked me what is the difference between a snapshot vs a system state backup?
The difference that I know of is the snapshot you have to write or copy the Guid and a system state is what you do for a regular backup. Plus I know snapshot is suppose to be an exact copy in the exact time that you do a snapshot. Other than that I don't know
what else there is for differences.
I would also like to know for myself: What is the difference between a snapshot vs a system state?
Thanks for any help given.
↧
How to Backup Weekly And Incremental A Day
Could someone tell me how would I backup window server full every Friday, and then each day is incremental?? Recently in the past, it backs up Full, and then each day is incremental, as shown on the picture below. When I schedule it in "window task schedule" to every Friday, then the backup is not occurring not even incremental everyday. Please tell me how I can backup window server full every Friday, and then each day is incremental. Thanks.
Jason Chang
Hawaii
Jason Chang
↧
Server Backup - The media is write-protected (0x80070013)
I think that most are looking at the target drive as the problem. I think the source drive is the problem. I migrated to a new SSD and haven't had the problem with backup's that I had before. (0x80070013) The media is write-protected. I ran a backup last night using Windows Backup and it was taking forever. I looked at my drive during the backup and there was a consistent hit creating the System Image.
I stopped the backup and restarted it and it completed in about 20 min. There was no problem reported in Event Viewer. Not sure what the problem was. Any thoughts?
↧
↧
Error when trying to update Online Protection Policy in DPM 1807
Hello,
Our company makes use of System Center Data Protection Manager 1807 with Online Protection to Azure to do our long term back ups.
We are currently working to update our online protection policy to include a new file server. When working through the "Add Online Protection" wizard in DPM, we end up with this error at the end.
When checking CBEngineCurr.log I see this series of warnings when we get the error:
12102C78 03/0419:00:47.59379WcfClient.cs(960)792206D8-C1CB-44EA-8A38-50D6E7F222D0 NORMALExecuting web service call | Params: {ServiceInterface = Microsoft.Internal.CloudBackup.Common.ROCatalog.Interface.IROCatalogExternalChannel}{Description = GetDataSourcesInfo}{TargetEndpoint = https://pod01-prot1c.wus.backup.windowsazure.com/ROCatalogExternalService.svc}12102C78 03/0419:00:47.59369CBEngineWcfClientHelper.cs(393)792206D8-C1CB-44EA-8A38-50D6E7F222D0 NORMALSetting RequestId header for outgoing request | Params: {RequestId = 76415b78-e6d2-41c6-b615-a86b5a3b6a08}{WorkitemId = eac0945c-454b-4320-b078-c657f59103c5}{TaskId = 792206d8-c1cb-44ea-8a38-50d6e7f222d0}{AgentVersion = 2.0.9153.0}
12102C44 03/0419:00:47.78171dscontext.cpp(184)[000000009B187BC0]E45FC3C4-F792-4E24-836A-5818A08E8F31ACTIVITYLast completed state for Ds Id (263884613333781) is 5
12102C78 03/0419:00:47.96879WcfClient.cs(998)792206D8-C1CB-44EA-8A38-50D6E7F222D0 WARNINGUnable to make web service call | Params: {Exception: = System.ServiceModel.FaultException`1[Microsoft.Internal.CloudBackup.Common.FailureModeling.CloudServiceFault]: Internal Service Error (Fault Detail is equal to ErrorCode = CatalogUnauthorizedError, DetailedErrorCode = 0, DetailedErrorSource = None/None, Message =
12102C78 03/0419:00:47.96879WcfClient.cs(998)792206D8-C1CB-44EA-8A38-50D6E7F222D0 WARNING).}
12102C78 03/0419:00:47.96879WcfClient.cs(946)792206D8-C1CB-44EA-8A38-50D6E7F222D0 WARNINGFMBlock: FM exception caught | Params: {OperationCode = WcfProxyCall}{OperationStartTime = 3/4/2019 7:00:47 PM}{FMExceptionDetail = FMException: [ErrorCode:CatalogUnauthorizedError, DetailedCode:0, Source:Service/None/None, Message:]
12102C78 03/0419:00:47.96879WcfClient.cs(946)792206D8-C1CB-44EA-8A38-50D6E7F222D0 WARNING{InitialTargetEndpoint = https://pod01-prot1c.wus.backup.windowsazure.com/ROCatalogExternalService.svc}{Name = BasicHttpBinding_IROCatalogExternal}{WorkitemId = eac0945c-454b-4320-b078-c657f59103c5}{CurrentTargetEndpoint = https://pod01-prot1c.wus.backup.windowsazure.com/ROCatalogExternalService.svc}{RequestId = 0000000002_76415b78-e6d2-41c6-b615-a86b5a3b6a08_792206d8-c1cb-44ea-8a38-50d6e7f222d0}{IdentityType = Container}{Identity = 4476b24450c8b73907148a30d498a3cf98ac204c}
12102C78 03/0419:00:47.96879WcfClient.cs(946)792206D8-C1CB-44EA-8A38-50D6E7F222D0 WARNING}
12102C78 03/0419:00:47.96879WcfClient.cs(694)792206D8-C1CB-44EA-8A38-50D6E7F222D0 WARNINGFMBlock: FM exception caught | Params: {OperationCode = WcfProxyAsyncCall}{OperationStartTime = 3/4/2019 7:00:47 PM}{FMExceptionDetail = FMException: [ErrorCode:CatalogUnauthorizedError, DetailedCode:0, Source:Service/None/None, Message:]
12102C78 03/0419:00:47.96879WcfClient.cs(694)792206D8-C1CB-44EA-8A38-50D6E7F222D0 WARNING{InitialTargetEndpoint = https://pod01-prot1c.wus.backup.windowsazure.com/ROCatalogExternalService.svc}{Name = BasicHttpBinding_IROCatalogExternal}{WorkitemId = eac0945c-454b-4320-b078-c657f59103c5}{CurrentTargetEndpoint = https://pod01-prot1c.wus.backup.windowsazure.com/ROCatalogExternalService.svc}{RequestId = 0000000002_76415b78-e6d2-41c6-b615-a86b5a3b6a08_792206d8-c1cb-44ea-8a38-50d6e7f222d0}{IdentityType = Container}{Identity = 4476b24450c8b73907148a30d498a3cf98ac204c}
12102C78 03/0419:00:47.96879WcfClient.cs(694)792206D8-C1CB-44EA-8A38-50D6E7F222D0 WARNING}
12102C78 03/0419:00:48.03175OMUtils.cs(84)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALGetFQDNForServer = DPM Server name removed
12102C78 03/0419:00:48.04671CBEngine.cs(569)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALSetCBPolicies is called for policy:551f09f9-0478-48eb-8385-f61c9e99d193
12102C78 03/0419:00:48.04669CBPolicy.cs(571)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALSavePolicyEx(): Backup schedule: 12:00 AM
12102C78 03/0419:00:48.04669CBPolicy.cs(571)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALType of backup schedule: Daily
12102C78 03/0419:00:48.04669CBPolicy.cs(571)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALEveryday
12102C78 03/0419:00:48.04669CBPolicy.cs(571)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALEvery 1 Week RetentionPolicy :Retention Days:60
12102C78 03/0419:00:48.04669CBPolicy.cs(571)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALPolicy type: LtrPolicy
12102C78 03/0419:00:48.04669CBPolicy.cs(571)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALWeekLTRSchedule: RetentionWeeks: 8
12102C78 03/0419:00:48.04669CBPolicy.cs(571)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALMonthlyLTRSchedule: RetentionMonths: 24
12102C78 03/0419:00:48.04669CBPolicy.cs(571)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALYearlyLTRSchedule: RetentionYears: 7
12102C78 03/0419:00:48.04669CBPolicy.cs(571)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMAL
12102C78 03/0419:00:48.04669CBPolicy.cs(1697)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALIsVenusOrDPMTrue
12102C78 03/0419:00:48.04675OMUtils.cs(84)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALGetFQDNForServer = DPM Server name removed
12102C78 03/0419:00:48.04679RestClient.cs(711)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALExecuting web service call | Params: {Description = GetEnhancedSecurityStatus}{TargetEndpoint = https://pod01-manag1.wus.backup.windowsazure.com}
12102C78 03/0419:00:48.04669CBEngineWcfClientHelper.cs(441)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALSetting RequestId header for outgoing request | Params: {RequestId = 3da8f6cb-3c11-46bc-ae79-b7cda4b895e6}{WorkitemId = 20eb3e1d-ea3d-43fb-9c15-d20fe4406ffa}{TaskId = 9aec2857-ae1e-4b8f-825b-7c80a2bc5b96}{AgentVersion = 2.0.9153.0}
12102C78 03/0419:00:48.35979RestClient.cs(765)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALFinished web service call | Params: {Description = GetEnhancedSecurityStatus}{TargetEndpoint = https://pod01-manag1.wus.backup.windowsazure.com}
12102C78 03/0419:00:48.35969CBPolicy.cs(1707)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALFetching Offline seeding storage params from file
12102C78 03/0419:00:48.35969CBAzureStorageAccountDetails.cs(81)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 NORMALFile path with storage account details : X:\dpm-azure\Scratch\MicrosoftBackupProvider\OfflineApplicationParams_dpmfiles.xml
12102C78 03/0419:00:48.35969CBAzureStorageAccountDetails.cs(94)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 WARNINGThe exception thrown is :System.Exception: File does not exist X:\dpm-azure\Scratch\MicrosoftBackupProvider\OfflineApplicationParams_dpmfiles.xml
12102C78 03/0419:00:48.35969CBAzureStorageAccountDetails.cs(94)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 WARNING at Microsoft.Internal.CloudBackup.ObjectModel.OMCommon.CBAzureStorageAccountDetails.FetchFilePathStorageAccountDetails(String storageAccountName)
12102C78 03/0419:00:48.35969CBEngineHelper.cs(403)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 WARNINGFMBlock: FM exception caught | Params: {OperationCode = GenericOMCall}{OperationStartTime = 3/4/2019 7:00:48 PM}{FMExceptionDetail = FMException: [ErrorCode:OfflineSeedingPropertyFileNotFound, DetailedCode:0, Source:None, Message:]
12102C78 03/0419:00:48.35969CBEngineHelper.cs(403)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 WARNING}
12102C78 03/0419:00:48.35971CBEngineHelper.cs(412)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 WARNINGCaught CloudFMException with error detailsFMException: [ErrorCode:OfflineSeedingPropertyFileNotFound, DetailedCode:0, Source:None, Message:]
12102C78 03/0419:00:48.35971CBEngineHelper.cs(412)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 WARNINGStack trace: at Microsoft.Internal.CloudBackup.ObjectModel.OMCommon.CBAzureStorageAccountDetails.FetchFilePathStorageAccountDetails(String storageAccountName)
12102C78 03/0419:00:48.35971CBEngineHelper.cs(412)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 WARNING at Microsoft.Internal.CloudBackup.ObjectModel.OMCommon.CBPolicy.FetchOfflineV2Parameters(Boolean isVenusOrDPM)
12102C78 03/0419:00:48.35971CBEngineHelper.cs(412)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 WARNING at Microsoft.Internal.CloudBackup.ObjectModel.OMCommon.CBPolicy.SavePolicyEx(Boolean allowAdhocBackupPolicy, Boolean allowOfflineSeedingParamUpdate)
12102C78 03/0419:00:48.35971CBEngineHelper.cs(412)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 WARNING at Microsoft.Internal.CloudBackup.Engine.CBEngine.<>c__DisplayClass5e.<SetCBPolicies>b__5b()
12102C78 03/0419:00:48.35971CBEngineHelper.cs(412)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 WARNING at Microsoft.Internal.Common.FailureModeling.FMComponent`3._FMBlock(String fileName, Int32 lineNumber, FMBlockArgs args, Action fmPrecheckBlock, Action fmUserBlock)
12102C78 03/0419:00:48.35971CBEngineHelper.cs(412)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 WARNING at Microsoft.Internal.CloudBackup.Engine.CBEngineHelper.CallOMFunction(Action omFunction)
12102C78 03/0419:00:48.35971CBEngineHelper.cs(258)9AEC2857-AE1E-4B8F-825B-7C80A2BC5B96 WARNINGCaught CloudFMException with ErrorCode OfflineSeedingPropertyFileNotFound, DetailedErrorCode 0
Tried to look up the error 100240 and found nothing. Also looked into the error code: CatalogUnauthorizedError and wasn't able to find a genuine solution. Only saw things dealing with deleting a "spurious windows task" which was never explained.
Anyone else getting this and any help with a fix? Any would be appreciated!
ksgrady
↧
Backup issue on Windows Server 2016 Essentials
Hello,
We have been having an issue for the last week with our Windows Server Backup failing on our Windows Server 2016 Essentials server. It is failing with the application event ID 517. The backup operation has failed with the following error code '0x807800AF' (The Volume Shadow Copy Service backup complete operation failed. The backup backs up the EFI System partition, local disk with all the data, Bare metal recovery, but fails on the System state. It says the Backup canceled. System state backup was canceled.
The error in the windows server backup software is the Volume Shadow Copy Service backup complete operation failed. A volume shadow copy service component encountered an unexpected error.
The server has been rebooted and we will get one working backup but the issue returns the following day.
↧
Whoami /groups does not show domain groups
Hi there,
We have a problem with 1 of our domains, we want to install our backup tool from Acronis with Exchange application. Herefore we need to login as domain admin. This shows us the following error:
Cannot collect the metadata of Microsoft Exchange Server
The specified user does not have enough rights to create an application-aware backup.
TROUBLESHOOTPlease specify the credentials of a user who is a member of the 'Organization Management' role group or disable the application-aware backup of Microsoft Exchange Server.
We contacted Acronis, they told us; the problem is using the command: WHOAMI /GROUPS does not show any domain groups.. This is why Acronis software thinks our domain admin is not member of the organization management.
Somehow this does not work on any of the servers in this domain. We have more domains where this command DOES show domain groups.. We can't find anything different in the domain.
whoami /groups
GROUP INFORMATION
-----------------
Group Name Type SID
Attributes
Everyone Well-known group S-1-1-0
Mandatory group, Enabled by default, Enabled group
MGNT\Acronis Remote Users Alias S-1-5-21-93328260-64
8593991-1687379530-1001 Mandatory group, Enabled by default, Enabled group
BUILTIN\Administrators Alias S-1-5-32-544
Mandatory group, Enabled by default, Enabled group, Grou
p owner
BUILTIN\Users Alias S-1-5-32-545
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\REMOTE INTERACTIVE LOGON Well-known group S-1-5-14
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\INTERACTIVE Well-known group S-1-5-4
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\Authenticated Users Well-known group S-1-5-11
Mandatory group, Enabled by default, Enabled group
NT AUTHORITY\This Organization Well-known group S-1-5-15
Mandatory group, Enabled by default, Enabled group
LOCAL Well-known group S-1-2-0
Mandatory group, Enabled by default, Enabled group
Authentication authority asserted identity Well-known group S-1-18-1
Mandatory group, Enabled by default, Enabled group
Mandatory Label\High Mandatory Level Label S-1-16-12288
↧
Backups taking way to long using WBadmin
Greetings,
Using WBAdmin on a scheduled task. Having issues with the "compacting of the virtual disk" taking forever, and running on every single backup (and not incremental like it's supposed to). I realize that this is a "feature", but is there any way to turn it off? It's a feature that I do not need. The current file server size is under 2tb, starts at 4:30pm and is taking almost 24+ hours to complete.
Currently just going over a 1GbE connection, would a 10GbE connection be better?
We do a full backup every day of our File Server. We are not looking to do incremental backups.
wbadmin start backup -backupTarget:\\10.x.x.x\Fileserver\ -include:c:,x: -systemstate -vsscopy -user:XX\XX -password: -allowDeleteOldBackups -quiet -noVerify
Using WBAdmin on a scheduled task. Having issues with the "compacting of the virtual disk" taking forever, and running on every single backup (and not incremental like it's supposed to). I realize that this is a "feature", but is there any way to turn it off? It's a feature that I do not need. The current file server size is under 2tb, starts at 4:30pm and is taking almost 24+ hours to complete.
Currently just going over a 1GbE connection, would a 10GbE connection be better?
We do a full backup every day of our File Server. We are not looking to do incremental backups.
wbadmin start backup -backupTarget:\\10.x.x.x\Fileserver\ -include:c:,x: -systemstate -vsscopy -user:XX\XX -password: -allowDeleteOldBackups -quiet -noVerify
↧
↧
Win Server Backup - EFI partition issues
Hello,
Server - HPE Proliant DL360 Gen10
OS - Windows Server 2012R2
100GB C: Drive - GPT Partition
100MB EFI Partition
350MB Recovery Partition
200GB Backup Partition - MBR
Trying to do full server backup (bare metal, system state, efi, and c:) and backup fails. On the EFI partition and system state I get 'Handle is invalid' If I check logs, I get
Backup of volume \\?\GLOBALROOT\Device\HarddiskVolume2\ has failed. The handle is invalid.
After this failed backup, getting into Server Backup GUI or Disk Management/diskpart is impossible. Must reboot server to make it work.
I've tried to use vssadmin to change location of shadowstorage, but I get invalid options error
Ideas?
↧
windows could not start block level backup engine service
Hello,
Im trying to perform system state backup for one of the server its unable to run. Last week we have performed the system state backup without any issue.
Operating System:2008
OS Version: R2 Small Business Server 2011 x64 Edition Build 7600
RAM-32 GB
Following event ID is reported in the logs;
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 7/2/2013 2:25:35 PM
Event ID: 754
Task Category: None
Level: Information
Keywords:
User: SYSTEM
Computer: ABC
The Block Level Backup Engine service has stopped.
When we try to restart the Block Level Backup Engine service we get error as “Windows could not start the Block Level Backup Engine Service on Local Computer.
Error 0x800700b7: Cannot create a file when that file already exists.”
I have already restarted Virtual disk and Volume shadow copy service, but no luck.
Any help in resolving this issue will be much appreciated.
Thank you.
Keshava
↧
Restoring a Domain Controller from a Bare Metal Recovery Backup
Hello All,
I currently have 3 domain controllers on site. 2 are Windows 2003 Standard SP2 and the newest is Windows 2008 R2 Sp1 whcih holds the FSMO roles.
I backup the system state on all three servers using a 3rd party backup solution everynight. I also perform a full server backup on the 2008 server using windows backup including the BMR option.
My question is, and I've done some searching but cant find an answer that satifies me is how would you go about restoring the Windows 2008 server should a failure occur. Would you move seize the fsmo roles on another server then restore the Windows 2008 DC manually by just re-installing Windows and joining to the domain and promoting again as the other two domain controllers are still available?
Or would you restore via the BMR option, how would this affect Active directory and the FSMO roles bearing in mind the other dc's would still be available?
Is the BMR option only good in this situation if we have a total site failure where all 3 servers were wiped out?
If anyone could shed any light on this I would be particulary grateful.
Many Thanks
Chris
↧
Windows Server Backup
hi everyone
i get the following error when i try to open windows server backup in windows server 2008
i tried the solutions mentioned in the following article with no luck
- https://social.technet.microsoft.com/Forums/lync/en-US/4d87c9a1-8f1b-4bb3-8b13-ee37bc3c014b/windows-server-backup-failing-to-start-error-a-fatal-error-occurred-during-a-windows-server-backup?forum=windowsbackup
- https://social.technet.microsoft.com/Forums/windowsserver/en-US/6f6c7b05-892f-4cf1-bfbe-f5e4ae748414/wbadminmsc-on-windows-server-2012-fails-to-start-in-mmc-with-error-wbengineexe-0xc000005?forum=windowsbackup
- https://social.technet.microsoft.com/Forums/en-US/c3ec1565-56dd-4b2c-be75-65cd8a2a2f65/a-fatal-error-occurred-during-a-windows-server-backup-snapin-wbadminmsc-operation?forum=windowsbackup
any suggestions
thanks in advance
↧
↧
Problem recovering from Windows Server Backup
Hello,
need some help, but I don't know if this is the write place.
Got a Windows 2012 R2, crashed and a Backup in a iSCSI disk.
When I try to recover (create a Windows 2012 Boot disk with iSCSI Drivers), the recover does not recognised any backup on the iscsi.
The files are there: The original machine add 1 disk with 3 partitions (System Reserved, C and D), so 3 vhdx files, with size of the partitions.
The backups were running smoothly so i think the backups are OK.
I would like to recover the whole, machine, or some files in disk D, but when I try to mount the vhdx, on a Windows 10, the partition D shows in raw, and the file system is not recognised.
What's the best solution to recover from the Windows Server Backup?
Convert vhdx to another format?
What's the best tool to use?
Why wbadmin doesn't recognise any backups even the backups were running sucessfully?
↧
Data Recovery (Very Urgent)
Hi,
Can anyone recommend the best paid software which can recover data from an overwritten RAID5 Drives array which was then reconfigured as RAID 0 with new data written on it?
Thanks.
↧
Backup and restore registry
How i can successfully backup and restore registry for a Domain Controller using System State Restore. We have an incident before where we want to restore registry but it was not successful.
↧
How to read a message on Windows server: >xcopy d:\*.* g:\wed /h /d /i /c /k /e /y
This message was on our server when we turned on the screen. I get that it is copying/ but I don't understand the "g:\wed" part. Is this someone outside trying to copy our database? Are they trying to xcopy to gdrive? Dodn't know I had one.
↧
↧
BACKUP STORAGE ALMOST FULL
Hello,
My window server backup storage almost full. Is it advisable to delete old ones and how Will i do that.Also when the drive is full does it automatically deletes the old ones.
Thank you.
Yomi.
↧
Windows Backup Issue
I have a issue wih Windows server Backup. I create a new task with full backup of server, include Bare-metal, system state, EFI Partition, HyperV.
Task start normally, but after few minutes, a error message bellow appears:
The backup operation started at '2019 - 03 - 13T03: 00: 07.986929000Z' failed with the following error code '0x8078011E' (Windows Backup failed to get a unique lock on the EFI system partition ( This may occur if another application is using files in the ESP. Try the operation again.). Review the event details for a solution, and then run the backup again after you troubleshoot the problem.
Machine Specs:
Proc: Intel Core i7-8700 3.20Ghz
Mem: 24 Gb
Windows Server 2016 Std - 1607 - Comp: 14393.2828
Task start normally, but after few minutes, a error message bellow appears:
The backup operation started at '2019 - 03 - 13T03: 00: 07.986929000Z' failed with the following error code '0x8078011E' (Windows Backup failed to get a unique lock on the EFI system partition ( This may occur if another application is using files in the ESP. Try the operation again.). Review the event details for a solution, and then run the backup again after you troubleshoot the problem.
Machine Specs:
Proc: Intel Core i7-8700 3.20Ghz
Mem: 24 Gb
Windows Server 2016 Std - 1607 - Comp: 14393.2828
↧
VSSADMIN continually waiting for response from VSS writers
Hi Everyone,
We have a Corporate Server 2012 Datacenter Hyper-V Host with about 10 VM's which use ARCServe and the Microsoft Hyper-V writer.
We aren't getting backups and when I run a vssadmin list writers I get the "waiting for response"
C:\Windows\system32>vssadmin list writers
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Waiting for responses.
These may be delayed if a shadow copy is being prepared.
I've restarted the volume shadow copy and Microsoft Software shadow copy provider services but it still won't list the vss writers.
Looks like a reboot will only resolve the issue. Any suggestions would be appreciated.
↧